6.24.2023

Super ICOM Pro N3+ Firmware File 1.49 Free Download

 Super ICOM Pro N3+ BMW diagnosic tool firmware can be updated online. Firmware upgrade procedure is the same as the original ICOM or high quality ICOM clones.

 

 

Preparation:

1.Open ITool Radar tool on desktop and check your current icom firmware version, it is v147

update Super ICOM Pro N3+ Firmware 1

update Super ICOM Pro N3+ Firmware 2

2. Free download latest icom firmware update files- bootimage and applicationimage (149 June 2023 version)

update Super ICOM Pro N3+ Firmware 3

Firmware Update procedure:

1. Connect the Super ICOM Pro N3 to a computer with USB cable and power on ICOM with a 12V power adapter

update Super ICOM Pro N3+ Firmware 4

2. Open the IE browser http://169.254.92.38:60080/, input user name: boot and password: NZY11502 (capital letters)

update Super ICOM Pro N3+ Firmware 5

3. Click “update firmware” and you will see the version information of ICOM firmware

update Super ICOM Pro N3+ Firmware 6

update Super ICOM Pro N3+ Firmware 7

4. Select icom-bootimage bin file, set the image type to system and click “send the file”

update Super ICOM Pro N3+ Firmware 8

update Super ICOM Pro N3+ Firmware 9

5. When it says “write the image file to the flash”, click Yes and the Super ICOM light will turn red

update Super ICOM Pro N3+ Firmware 10

6. When it prompts “the system image update was successful”, click “update firmware”

update Super ICOM Pro N3+ Firmware 11

7. Select icom-applicationimage bin, set the image type to application, and click “send the file“, the file will take a few minutes

update Super ICOM Pro N3+ Firmware 12

update Super ICOM Pro N3+ Firmware 13

8. When it says “write the image file to the flash”, click Yes and the ICOM light will turn red again

update Super ICOM Pro N3+ Firmware 14

9. Firmware update completed. Click “reboot”

update Super ICOM Pro N3+ Firmware 15

10. Check current firmware version

update Super ICOM Pro N3+ Firmware 16

update Super ICOM Pro N3+ Firmware 17

Done.


https://www.obdii365.com/service/super-icom-pro-n3-firmware-update.html

6.21.2023

How to Connect Super ICOM Pro N3+ via USB and WiFi?

Super ICOM Pro N3+ diagnostic tool supports USB and WiFi connection.

How to connect Super ICOM Pro N3+ via USB?

First time use the device requires to set up IP address. 

1. Connect N3+ with power supply or power by OBD from car
connect Super ICOM Pro N3+ via USB 1
2. Connect N3+ with laptop with USB
3. Go to Network Connection, find out Realtek USB FE Family Controller network
connect Super ICOM Pro N3+ via USB 2
4. Click on Properties-TCP/IPV4

Set 
IP address to 169.254.90.90, 
Subnet mask: 255.255.0.0, 
Preferred DNS: 169.254.255.1, click “OK”
connect Super ICOM Pro N3+ via USB 3
 
Note: Each N3+ is bound to 1 PC. If change another N3+, need to reset IP.  After disconnecting the USB cable, the network icon will disappear, and you don’t need to set the IP address again when you use the N3+ after the computer is wired or wirelessly connected to the Internet.

Then run ITool Radar, you will see ICOM device is connected.

connect Super ICOM Pro N3+ via USB 4



How to connect Super ICOM Pro N3+ via WiFi?

N3+ supports WiFi direct connection which is very easy. You have to disconnect USB cable before connecting with WiFi. 
Search for WiFi name "N3+ ICOM-****" and pair with password 12345689.  

connect Super ICOM Pro N3+ via wifi 1

connect Super ICOM Pro N3+ via wifi 2



6.20.2023

BMW ICOM Next vs Super ICOM Pro N3+

 The Super ICOM Pro N3+ is the 2023 new BMW ICOM alternative since all ICOM A2/Next clones are discontinued.

Here comes a brief comparison between ICOM Next clone, ICOM Pro 1st generation and 2nd generation (N3+).

 

ICOM Next vs Super MB Pro N3 vs ICOM Pro N3+

BMW ICOM NextSuper MB Pro N3Super ICOM Pro N3+
Image


Solutionvarious solutions, usually use VXDIAG solutionOriginal ICOM Next solutionOriginal ICOM Next solution
ConnectionUSB, WiFi

WiFi password: 12345678

No need for DHCP server or router, it’s build in.

 

USB WiFi

WiFi password: 12345678

No IP setting (only 1st time). Easy to connect

 

USB WiFi

WiFi password: 12345678

No IP setting (only 1st time). Easy to connect

 

Vehicle Model

 

BMW, Mini, Rolls-Royce

 

BMW, Mini, Rolls-Royce, BMW motorcycleBMW, Mini, Rolls-Royce, BMW motorcycle
ICOM SoftwareBMW ISTA-D

BMW ISTA-P

E-sys

WinKFP

Tool32

INPA

BMW Coding tool

Ncs Expert

KSD2

BMW ISTA-D

BMW ISTA-P

E-sys

WinKFP

Tool32

INPA

BMW Coding tool

Ncs Expert

KSD2

BMW ISTA-D

BMW ISTA-P

E-sys

WinKFP

Tool32

INPA

BMW Coding tool

Ncs Expert

KSD2

Software updateBy HDD/SSDBy HDD/SSDBy HDD/SSD
USBType-C USBUSB 3.0USB 3.0
Heat DissipationNoDual Heat DissipationDual Heat Dissipation
Firmware version1.9.3.1ApplicationImage:147

BootImage: 130

 

ApplicationImage:147

BootImage: 130

 

Firmware UpdateVia VX Manager

FW Update Guide

 

Yes, same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root

password: NZY11502

FW UPDATE GUIDE

Yes, same procedure as the original ICOM Nexthttp://192.168.92.38.60080/, user name: root

password: NZY11502

FW UPDATE GUIDE

Compatible HDD/SSD

 

Compatible with vxdiag HDD/SSD onlyCompatible with both ICOM Next (SS220 series) and VXDIAG HDD/SSDCompatible with both ICOM Next (SS220 series)
and VXDIAG HDD/SSD
fiber programmingNoNoNo
20-PIN VehicleNoYes, with an optional 20-pin adapter for older BMWYes, with an optional 20-pin adapter for older BMW
10-PIN BMW MotorcycleNoYes, with an optional 10-pin adapterYes, with an optional 10-pin adapter for motors
One-key switch buttonNoNoYes
DoIP protocolNoYes, Support Benz, VAG, JLR DoIP vehiclesYes, Support Benz, VAG, JLR DoIP vehicles
J2534NoNoCan be used as J2534 passthru device. Compatible with Honda HDS, techstream,
JLR SDD, VAG ODIS etc
BMW AppNoBMW BimmerCode, Bimmerlink, MHD, Bimmergeeks, XHP Flashtool, XDelete, M Flasher etcBMW BimmerCode, Bimmerlink, MHD,
Bimmergeeks, XHP Flashtool, XDelete, M Flasher etc
Price$269 without HDD$435 without HDD$259 without HDD

 

In Sum:

ICOM Next is a specific BMW dealer level diagnostic scanner. The clone uses different solution, so it cannot scan non-OBDII olders models nor motorcycles.

Both Super MB Pro N3 and ICOM Pro N3+ are multi function devices. They adapt original ICOM solution which allows firmware update from ICOM server.

super icom pro n3+ 1

super icom pro n3+ 2

super icom pro n3+ 3

Apart from BMW ICOM function, the ICOM Pro N3+ can be used as DoIP and J2534 device as well.

N3+ has a one-key switch button to freely switch between ICOM software and J2534/DoIP software.

super icom pro n3+ 4 

To use N3+ as a DoIP device:

Connect N3+ with laptop via USB cable, long press the one-key switch button on the N3+ main unit, if USB and WiFi indicators on the main unit flash, search N3+ ICOM wifi and pair with password: 123456789, starts ODIS/Xentry/ICOM software to scan DoIP models.

super icom pro n3+ 5

To use N3+ as a J2534 passthru for HDS TIS ODIS SDD etc:

First install the corresponding software driver, then install monogoose j2534 for super icom pro n3+.

Select passthru as ISO J2534 device.

Connect N3+ with USB cable, long press N3+ switch button for 3s, if USB and WiFi indicators on the main unit flash, software is ready to use.

5.11.2023

Free Download BMW ISTA-P 3.69.0.200

 Here comes the free BMW ICOM ISTA-P Rheingold  3.69.0.200 standalone software by mega.

 

Brand: BMW
Version: 3.69.0.200 [07.2021]
Capacity: 25.3 GB
Languages: Multi-Languages
Region: All Region
Additional Information:  ISTA-P 3.69.0.200 with ISTA-P Loader 6.4

Description: Program for reprogramming electronic control units for BMW, MINI and Rolls-Royce cars.

 

ISTA-P 3.69.0.200

No password. Test by your side.

ISTA-P 3.69.0.200 download

Description: BMW ISTA P Programming and coding Software Version 3.69.0.200. This is the very latest version covering all 2021 manufactured BMW’s. This is the platform used by BMW dealerships for programming, individualization and encoding of BMW vehicles.

 

Computer Requirements:
Windows 7/10 (32-bit or 64-bit)
2.2Ghz CPU (2 core minimum)
4Gb RAM (8Gb Recommended)
100GB for ISTA-P (Programming)

 

BMW scanner recommended:  VXDIAG VCX SE BMW, BMW ICOM Next, Godiag V600 ICOM

If need BMW ISTA-D as well, check ISTA-D 4.39 + ISTA-P 3.70

 

How to use ISTA-P standalone?

Just unzip the ISTA-P files and loaders in the correct directory. If you have installed, then use loader 6.6.

Use ista-p loader then you get screen automatic search location.

 

How to install & activate ISTA-P 3.69 standalone step-by-step?

ISTA-P 3.69.0.200 install 1

Run BMW_ISPI_ISTA-P_SYS_3.69.0.200 as administrator
Agreement license agreement

ISTA-P 3.69.0.200 install 2

ISTA-P 3.69.0.200 install 3

Install ISTA-P until finished

Run ISTA-P Loader 6.4 folder
Open 3.69 loader error fix folder

Copy and paste TaurusAdministration file to C:/ISPI/data/TRIC/ISTA-P/BMW/Administration/TaurusAdministration folder

ISTA-P 3.69.0.200 install 4

ISTA-P 3.69.0.200 install 5

ISTA-P 3.69.0.200 install 6

Run BMW ISTA-P Loader
Paste activation key in the Activation Key-Loader V6.4L text

ISTA-P 3.69.0.200 install 7

ISTA-P 3.69.0.200 install 8

Copy and Paste BMW ISTA-P Loader to C:/ISPI/data/TRIC/ISTA-P/BMW/Administration/TaurusAdministration folder

Run BMW ISTA-P Loader in this folder
Select Automatic Search and save

ISTA-P 3.69.0.200 install 9

Select language and save

ISTA-P 3.69.0.200 install 10

Run software

ISTA-P 3.69.0.200 install 11

ISTA-P 3.69.0.200 install 12

You can send BMW ISTA-P loader shortcut to desktop.

3.09.2023

Free Download BMW ISTA 4.39.20 Standalone

 BMW ISTA 4.39.20 torrent + PSZData 4.40.11 downloaded free here.

Free test by your side. You are at your risk.

 

Free download

ISTA 4.39.20 Torrent

 

ISTA standalone 4.39.20

 

You can also download the ISTA 4.39 German language separately.

 

PSZData 4.40.11 Full torrent

 

PSZData 4.40.11 Lite

 

ISTA+ 4.39.20 in 1TB HDD format

 

ISTA+ 4.39.20 in 1TB SSD format 

 

Installer file structure

Example file structure for installer:
| ista_standalone_installer_4.28.13.exe
| ISTA_v4.28.13.22878.7z (required)
| BLP_4.28.12.7z (required)
| SDP_4.28.12.7z (optional, only for programming)
| ExecutionBreak_4.28.12 (optional)
| setup.ini (need to compare files with MD5 hash)
|
\—SQLiteDBs
OTHER_4.28.13.7z (required)
EN_4.28.13.7z (required)
DE_4.28.13.7z (optional)
ZH_4.28.13.7z (optional)
RU_4.28.13.7z (optional)
IT_4.28.13.7z (optional)

BMW ISTA 4.39.20 software 1

BMW ISTA 4.39.20 software 2

System requirements for ISTA 4.21.3x and higher:

1. Windows 10 v1903 or higher
2. Microsoft .NET Framework 4.8.x
3. Visual C++ Runtime 2015-2019
4. Google Chrome
5. Windows username should not contain spaces, dashes and special characters like “รถ”.

Windows 7/8 not supported!!!
Internet Explorer and EDGE not supported!!!

 

 

How to Install?

autoinstaller, no activation needed
installation is very simple, there is an installer, it couldn’t be easier if you can read.

 

ISTA Standalone

* fix ICOM connection with enabled “Ethernet as preferred communication channel…”
* Reject fake FSC’s disabled permanently.
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config. (Windows 7 not supported)
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* (support removed due to incompatibility) Diagnose for J29 (Toyota Supra) is now always enabled.
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

– for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same patchVersion as App (example 4.39.2x).
– for Programming is SDP needed, using older or newer Versions allowed.

 

Compatible devices:

BMW ICOM, BMW ICOM Next clone & original, VXDIAG VCX SE BMW

 

ISTA+ 4.39.20 torrent software display 


BMW ISTA 4.39.20 software 3

BMW ISTA 4.39.20 software 4

ISTA 4.39.20 HDD/SSD software display

BMW ISTA 4.39.20 software 5

BMW ISTA 4.39.20 software 6

BMW ISTA 4.39.20 software 7